Save Les Forges de Montreal !

Subject: LES FORGES DE MONTRÉAL ORDERED TO EVICT!

SUPORT US STEP 2.

Montréal, August 8 – In an effort to support Les Forges de Montréal, we are asking the public to share the video Refusons l’éviction des Forges de Montréal.

We are grateful for the support expressed by a great number of people in the past few weeks. Les Forges de Montréal needs your continued support in raising awareness about our non-profit organization’s current situation of by sharing our video, Refusons l’éviction des Forges de Montréal.

The city of Montréal issued an eviction order in February. The city owns the building that we have been renting since 2000, under a lease signed by both parties. According to the city, we failed to comply with a clause between 2006 and 2008, and are therefore being ordered to vacate the premises by December 2016. The city served notice eight (8) years after the alleged facts. Clearly, the time period for making claims has lapsed. The city’s actions also fail to acknowledge Forges de Montréal’s efforts to pass on valuable skills and knowledge that are part of our intangible heritage.

Forge de Montréal’s mission is to raise public awareness, share knowledge and safeguard blacksmithing and the blacksmith trade. Our very survival is at stake at present. The building that we have been occupying for the past 16 years is used by artisan blacksmiths who practice their almost extinct trade on a daily basis, breathing life into an ancient craft and keeping it alive for future generations.

Les Forges de Montréal’s unique undertaking to demonstrate and sustain blacksmithing, an intangible cultural heritage, shows great potential for development, provided we are given the opportunity to carry on our activities. We have made great efforts to maintain and enhance the heritage building in which we have taken up residence, to the extent of investing over a half-million dollars. The preservation of Riverside Pumping Station, built in 1887, is closely intertwined with Les Forges de Montréal’s continued efforts. Unless actions are taken to cancel the eviction notice, all of our efforts and investments will have been futile.

Refusons l'éviction des Forges de Montréal from marsupilami dubitatif on Vimeo.

You can support Les Forges de Montréal and help us continue our activities at the old pumping station by sharing our video on social media such as Facebook and Twitter. We need your voice! You can also sign our petition, which was launched on July 5.

We’re counting on you!

Watch the video (English subtitles): https://vimeo.com/174935283

Share the

video:https://www.facebook.com/159805824113079/videos/1090728144354171/

Sign the petition: https://www.change.org/p/maire-ville-montreal-qc-ca-soutien-aux-forges-de-montr%C3%A9al-contre-l-avis-d-expulsion-de-la-ville-de-montr%C3%A9al

For more information on Les Forges de Montréal, contact Mathieu Collette, artisan blacksmith and founding member of Les Forges de Montréal , at 514 838-8557.

++++++++

I met a number of the individuals involved with Forges de Montreal at CanIRON 9 in Trois Rivieres (2013)
Their enthusiasm was infectious. Their energy was simply amazing.

Team from Les Forges compacting Lee Sauder's bloom (Lee in purple shirt).

  Blacksmithing continues to have a visibility problem as an element of fine craft inside Canada. Les Forges de Montreal is a gallant effort to bring our work in front of the public  - as a vibrant contemporary art medium. It provides an excellent working space for artisan blacksmiths, and a rare teaching opportunity to ensure the skills are both developed and passed into new generations. 

 

RED means STOP

I don't care what the **** your 'religion' is.

Typical consideration of the legal STOP sign.

The Mennonite Meeting Hall is located about a kilometer north from Wareham, east side of County Road 41.

Every Sunday, the Meeting Hall lets out its Sunday services about 12:00 to 12:15.
And roughly 40 to 50 individual wagons head south into Wareham.
These are primarily of two types:
- Open topped small buggies pulled by a single horse, typically with two people.
- Enclosed large wagons pulled by a two horse team, typically with large family groups.

Every Sunday, the vast majority of these operators, stacked tight in a line, completely refuse to stop at the stop sign on the corner of Centre Line.
Usually at high speed (not even slowing to check for oncoming traffic).
Often the entire line of wagons in an unbroken chain.

Today I watched someone in a small single horse unit approach the stop sign.
Without visibly slowing down.
They were already past the stop sign when they finally checked to see if there was anything coming from the West (down Centre Line).
There was a pickup truck approaching the intersection from the West. Fortunately, traveling below the posted speed. It would have been roughly even with my driveway when the wagon operator checked that direction. (So about 100 feet)
They did manage to stop the horse. Not before loosing control of the animal, resulting in the wagon being positioned sideways across the intersection, the horse rearing to rear feet.
They eventually had to have the passenger jump out to grab the horse, completing a 270 degree circle inside the the intersection. They never did get control of the animal, the passenger having to jump back on to the wagon as it rocketed out of the intersection to the east.

RED MEANS STOP

If you intend to travel on the public roads in Ontario, you are legally required to OBEY the traffic laws controlling the operation of 'a vehicle' on those roads.
Fundamental to this is the following of all posted signs. The red octagon with the large * order * to STOP is key. It is not a recommendation. It is not 'do at your whim'. It is not 'based on some religion'. It is a rigid COMMAND.

 

Obey the laws or get off the public roads.

1) A horse drawn wagon is defined legally as 'a vehicle' under the Ontario Traffic / Highway Safety Act. It is subject to all the same legal restrictions as any other 'vehicle'.

2) If I personally do not follow the command to stop, even if I am on a bicycle, I will be subjected to a fine and subjected to a penalty against of driver's licence.

3) If a motor vehicle is approaching this intersection from the East, towards Wareham intersection, and at the legal speed limit, it will have no more that FOUR SECONDS to observe if the intersection is clear. This is the same amount of time someone *legally* stopped will be able to determine if there is vehicle is approaching. (Note that east / west traffic has legal right of way).

View west to the stop sign / 4 seconds out at 80 kph.

View from the legal stop line towards the east - reverse of view above.

 4) - My property is the same corner as the stop sign. It lays to the SE corner of my lot.
- I normally part at least one small trailer along the edge of Centre Line, in front of my house / shop.
- There is often extra visitor vehicles parked also along the extended edge of Centre Line (frequent weekend courses here).

One second from the intersection (at 80 kph). You can see my truck parked, behind it my small travel trailer. Note also the pickup truck *legally* stopped for the sign.

 5) Combine all this, and there is a better than 50 / 50 chance that when the expected major traffic accident happens from wagons NOT STOPPING LEGALLY, the inertia of the motor vehicle will at least roll it down the 8 foot bank into my yard - or impact my own (legally) parked vehicles.

Mennonites don't carry any insurance.
Wagons do not require licence plates, so there is no way to identify individual vehicles breaking the law.
Mennonites purposefully all dress alike. Most are wearing obscuring sun glasses. There is thus almost no way to identify individuals.


This potential accident is made more likely by an increasing number of young men driving hopped up 4 wheel drive, pickup, 'dirt trucks'.
Especially on the weekends.
Typically speeding, and otherwise ALSO not paying full consideration to the traffic laws.
Observed repeatedly attempting to make 'slew turns' and 'fishtailing' - intentionally.


Someone will eventually be killed at the intersection. Guess who is most likely going to have to clean up the mess?

Forging a Sword Blade

Ongoing commission, filmed July 15, 2016.

Working with patterned dies on a 50 lb air hammer.
This is a matched pair of dies contoured to create a roughly 2 1/4 inch wide simple diamond cross section, set up with a folded spring. The dies fit into a 'hardie' attachment that itself bolts to the bottom die of the air hammer.
(The air hammer was the first model built by David Robertson - about 15 years ago.)

Material being forged is middle carbon spring steel, the source is a (new) spring harrow tooth.
The starting dimension of that material was roughly 5/8 x 1 inch, curved to a half circle. This has been initially flattened, then forged to a starting profile as seen here at roughly 7/32 x 1 3/4 flat.


Each section of 4 inches requires roughly 6 passes like the ones seen here to create the (very) rough forged blade profile. As the blade is lengthened, it is important to ensure the centre line is kept as straight as possible. (Wavering in the edges is expected at the rough forged state.)

Once completed, the edges will be carefully forged to create ensure a minimum width to the blade, in this case 2 inches (plus?). Also a consistent thickness at the edges will be created. This may result in some bulges, but those will be ground out to made an even profile.

At the point seen in the video, about 20 inches of the required 32 inch finished blade have been rough forged. As can be seen, there is considerably more material available on the source bar than will be required for the finished sword.
The design calls for a short riccasso (unsharpened) section at the base of the blade. With this measurement established, the shoulder leading into the tang will be made, and the tang forged to the required length.

Sutton Hoo Burial Re-creation

Seen at the recent 'SCA 50th' event at Danville IN.

LARGE photo mosaic

One of the high points for me was this impressive display by Talymar of the burial chamber found at Sutton Hoo. The original find is most likely the burial of the Saxon king Raedwald, c. 625 AD.

Talymar has embarked on a lengthy and detailed project to re-create the entire burial chamber, along with all of the individual objects that were found within.

A few additional references:
Google Arts - Sutton Hoo
UK National Trust - Sutton Hoo
British Museum - Sutton Hoo & Europe
the Sutton Hoo Society

I hope to have more details to discuss on his project in the near future...